Rapid impact compaction specification - Rapid Impact Compactor

Rapid impact compaction machine specifications are HC04, HC08, HC12, HC16, HC20, HC36, HC42, HC60, HC84, HC150, of which HC36 and HC42 Rapid Impact Compactor use more, the specific technical parameters in the following figure for everyone to show, when choosing can refer to the table below, some of the parameters show more detailed, want to know more detailed parameters can be private message me.

Rapid impact compaction specifications

Model: HC

Impact energy: 4-150KJ

Effective depth: 1-10 meters

Hammer weight: 0.5-10t

Working height: 2.45-5.7 meters

Can be installed on excavators or loaders

Rapid impact compaction machine needs to be driven by excavators and loaders, the above chart does not show the model of suitable excavator and loader, then the following is a simple introduction to the various types of Rapid Impact Compactors should be equipped with how large excavators and loaders.

HC series rapid impact compaction equipment can be used with various brands of excavators or loaders on the market, the installation is very simple, the operation is convenient, and the after-sales staff will also come to the door to install and debug after purchase, so there is no need to consider how to install and other issues.

HC series Rapid impact compaction effective depth can reach up to 10m, the minimum is 0.4m, in the subgrade filling construction, the use of more is the HC36, there are also a small part of the use of HC42. HC series Rapid impact compaction equipment has 3 tamping gears, suitable for PLC remote control of tamping strength and frequency. After testing, after using 3 gears and 9 hammers to reinforce the bridge back transition area with 96% compaction, the settlement near the abutment is greater than 100mm, most of which is 150~250mm, some are about 300mm, the settlement of the normal crushing area is mostly about 100mm, the sedimentation of the heavy earth truck repeatedly rolling the part is 20~60mm, after the normal layered filling of the high-filled roadbed, the settlement amount of 120~180mm per 2m reinforcing settlement is 120~180mm, and the old roadbed of the widened road is excavated and reinforced after crushing, and the average settlement is 200~250mm According to the above test data, we can choose the appropriate rapid impact compaction.

All in all, the rapid impact compactor has a wide range of models and can be applied to various large and small projects. In the choice, or to the actual construction requirements, to choose the right rapid impact compaction equipment, if you do not know how to choose, you can private message, for you to recommend a suitable rapid impact compaction machine.